INALUM®
We are a 100% Mexican company with over 40 years of service in the market of metal casting for aluminum A380, A356, and Zinc 5 parts.
We are part of HERRALUM GROUP.
Aluminum and Zamak Injection
for different Industries
At INALUM®, we offer Aluminum and Zinc injection solutions tailored to the needs of various industries, ensuring precision, quality, and compliance with specific standards for each sector.
Industrial finishes
We offer a full range of finishes and complementary processes to meet the specific needs of each project.
Sanding
A process in which the metal of the part is ground down, with the aim of achieving a smooth or curved finish, depending on the product's requirements. Additionally, it helps remove any burrs from the piece.
Drilling
A process through which holes are made, including through holes, blind holes, and tapered holes.
Tapping
It involves creating a threaded finish inside a hole, in this case, within the drilled holes processed at the plant.
Stamping
A process in which a cut is made in the metal to achieve a finish or shape.
Grinding
The pieces are placed with a stone disc to correct, smooth, grind the metal, and achieve the required finish.
Assembly
It is the process by which two or more pieces are joined together after a process is applied to them.
The processes we perform at INALUM are::
- Screwing
- Riveting
- Press fitting bolts
- Overlapping
- Placing
- Press fitting bushings
Packanging
All finished products must be prepared for transport to their final destination, therefore, packaging is considered a process.
Rimming
Rimming is a process in which a rotating tool is passed inside a hole or opening to achieve a more precise and refined finish. It is also used to remove burrs within the natural cavities of the parts.
Sanding
A process in which the metal of the part is ground down, with the aim of achieving a smooth or curved finish, depending on the product's requirements. Additionally, it helps remove any burrs from the piece.
Drilling
A process through which holes are made, including through holes, blind holes, and tapered holes.
Tapping
It involves creating a threaded finish inside a hole, in this case, within the drilled holes processed at the plant.
Stamping
A process in which a cut is made in the metal to achieve a finish or shape.
Grinding
The pieces are placed with a stone disc to correct, smooth, grind the metal, and achieve the required finish.
Assembly
It is the process by which two or more pieces are joined together after a process is applied to them. The processes we perform at INALUM are:
- Screwing
- Riveting
- Press fitting bolts
- Overlapping
- Placing
- Press fitting bushings
Packanging
All finished products must be prepared for transport to their final destination, therefore, packaging is considered a process.
Rimming
Rimming is a process in which a rotating tool is passed inside a hole or opening to achieve a more precise and refined finish. It is also used to remove burrs within the natural cavities of the parts.
ISO 9001:2015 Certification Quality and Excellence Guarantee INALUM®
Our certification is a commitment to quality and continuous improvement. This international standard ensures that our company meets the highest levels of efficiency, customer satisfaction, and optimized processes.